Use this forum if you found a bug.
Kapitaen13
Posts: 46 Joined: 16 Jan 2019, 15:21
If I add a PickupType ( _FUEL_COAL_ ) to a route with the TSRE, this item is not displayed in the MSTS AE.
Probable cause: last line in .tit and .tdb
With TSRE
Code: Select all
PickupTrItemData ( 100000 00000000 )
With MSTS RE
Code: Select all
PickupTrItemData ( 100000 00000300 )
300=Coal, 280=Water, Diesel ?
Regards Jan
Goku
Site Admin
Posts: 364 Joined: 15 Jan 2019, 18:10
Location: Poland
Contact:
Thanks. I'm going to look at it.
Other pickup types are fine?
Kapitaen13
Posts: 46 Joined: 16 Jan 2019, 15:21
For Diesel = 380.
Other pickup types are fine?
I never saw a working freight load in the MSTS on german routes.
Regards Jan
Goku
Site Admin
Posts: 364 Joined: 15 Jan 2019, 18:10
Location: Poland
Contact:
But the problem is that my MSRE writes only zeros here:
PickupTrItemData ( 100000 00000000 )
Kapitaen13
Posts: 46 Joined: 16 Jan 2019, 15:21
Use the second link in the thread above
If you want to reset the track editor and the MSTS options at the same time, you can use the "Reset MSTS completely.reg" instead.
Kapitaen13
Posts: 46 Joined: 16 Jan 2019, 15:21
Setting the PickUp seems to be implemented idiot-proof. Thanks KUJU
You are setting a PickUp. There is only "0" in the second Number after the fist save.
Now you are going back and Move the PickUp. Now the second number is correct but the PickUp is empty!
Now i had the same Problem as you. Wenn i fill the PickUp again the second number is only "0". Something's going wrong here.
I'll test it again later on another route.
Regards Jan
Goku
Site Admin
Posts: 364 Joined: 15 Jan 2019, 18:10
Location: Poland
Contact: